Instrument Installation Guide
Below is an outline of steps to take after you have successfully purchased an instrument. Have questions?
Step 1
Within 10 minutes, hopefully sooner, you will receive an email from “Pulse Team” (noreply@pulsedownloader.com) with your Redemption/Serial Key after purchasing your product. Copy this key, you will paste it in later.
Step 2
Download the Pulse download application. Visit pulsedownloader.com. If you already have the Pulse application please make sure it is up to date.
Step 3
Launch the Pulse application. Again please make sure this is the latest Pulse application. Select “Add a Product” in the top right.
Step 4
Paste in the Redemption/Serial Key that Pulse Team emailed you.
Step 5
Select where you want to download the instrument to. Wether it’s to your Desktop (which we do not recommend) or to an external hard drive please make sure you have adequate hard drive space.
Step 6
Once your instrument has been successfully downloaded in the Pulse application navigate to Native Instruments website and download Native Access. You will use Native Access to register your instrument.
Step 7
Launch the Native Access application and click “Add a serial” in the bottom left.
Step 8
Paste in your Redemption/Serial Key that you received initially from the Pulse Team email. Yes this is the same key as Pulse.
Step 9
After you have successfully registered your product click Locate to point Native Access to where Pulse downloaded the new library.
Step 10
Click "Choose a location" to point to the folder to which you downloaded the library to.
Step 11
Once you have found that folder click “Open”. Make sure you select the parent folder. Not the ‘instruments’ or ‘samples’ folder.
Step 12
Confirm that you have selected the correct location of the sample library.
Step 13
If your DAW or Kontakt has been open please close it. Launch or re-launch Kontakt and you should find the Teletone Audio library in the left hand Library Browser and get to making music!
Still have questions?
Contact customer support.